View TLYE68CG_4132175.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TLRME68CG(F),TLYE68CG(F),TLGE68CG(F),TLFGE68CG(F)
TOSHIBA InGaAP LED
TLRME68CG(F),TLYE68CG(F),TLGE68CG(F),TLFGE68CG(F)
LED Lamps for mounting on through-hole PCB using an automatic insertion machine
* * * Lead(Pb)-free products (lead: Sn-Ag-Cu) 3mm package wide viewing angle Can be mounted on a PCB using an automatic insertion machine (please refer to mounting Precautions Using an Automatic Insertion Machine) InGaAP Emitted colors: red, yellow and green Colored, Transparent lens Applications: Various types of information panels, indicators for amusement equipment and panel backlighting illumination sources Unit: mm
* * * *
Lineup
Product Name TLRME68CG(F) TLYE68CG(F) TLGE68CG(F) TLFGE68CG(F) Color Red Yellow Green Green Material
JEDEC JEITA
4-3U1
InGaAlP
TOSHIBA
Weight: 0.15 g(Typ.)
Absolute Maximum Ratings (Ta = 25C)
Product Name TLRME68CG(F) TLYE68CG(F) TLGE68CG(F) TLFGE68CG(F) Forward Current IF (mA) 50 50 50 50 Reverse Voltage VR (V) 4 4 4 4 Power Dissipation PD (mW) 120 120 120 120
-40~100 -40~120
Operating Temperature Topr (C)
Storage Temperature Tstg (C)
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
1
2007-10-01
TLRME68CG(F),TLYE68CG(F),TLGE68CG(F),TLFGE68CG(F)
Electrical and Optical Characteristics (Ta = 25C)
Product Name TLRME68CG(F) TLYE68CG(F) TLGE68CG(F) TLFGE68CG(F) Unit Typ. Emission Wavelength
d P
Luminous Intensity IV Min 85 85 47.6 27.2 mcd Typ. 260 300 110 70 IF 20 20 20 20 mA
Forward Voltage VF Typ. 1.9 2.0 2.0 2.0 V Max 2.4 2.4 2.4 2.4 IF 20 20 20 20 mA
Reverse Current IR Max 50 50 50 50
A
IF 20 20 20 20 mA
VR 4 4 4 4 V
626 587 571 565
(636) (590) (574) (568) nm
23 17 17 15
Precautions
* These LED lamps made of InGaAlP will also emit some IR light. If a photodetector is located near an LED lamp, please ensure that it will not be affected by this IR light. * Manual soldering should be performed within 3 s at a maximum temperature of 300C or 5 s at a maximum temperature of 260C. * When forming the leads, bend each lead without applying any forming stress. Soldering must be performed after the leads have been formed.
Mounting Precautions Using an Automatic Insertion Machine
(1) These newly designed LED lamps are intended for mounting on both through-hole PCBs by means of an automatic mounting machine. Compared to conventional 3-mm LED lamps, they are less prone to the effects of stress during automatic mounting (such as mechanical stress within the package resin transmitted via the leads). This reduced mechanical stress results in a lower incidence of damage to the package resin and lower emission failure rates. If one of these lamps is subjected to excessive stress, however, the resin part may break or the lamp may be damaged in such a way that it will not emit light. Please take the following precautions when mounting these devices. * Toshiba recommends the use of a 0.9-mm PCB hole diameter. However, this recommendation is subject to the type of automatic mounting machine used, the board material and the way in which the board material has been processed. Please evaluate the mounting process carefully before actually using the automatic mounting machine to mount these LED lamps. The use of PCB holes with a diameter larger than 0.9 mm may result in increased stress when soldering is performed (depending on the lead cutting shape and the clinching method), and devices may easily be malfunction. The insertion pressure and clinching angle must both be minimized so as to minimize the lead-cutting stress and clinch stress applied to the LED lamps. Soldering Conditions
Preheating Temperature Time 120~150C Within 60 seconds Soldering Flow No more than 260C Within 5 seconds
* *
(2) Precautions when using Panasert radial-Taping automatic mounting machine: Two-lead LED lamps are suitable for mounting using an anvil due to its movable-blade structure. When using three-lead type, please take the following precautions. * * Synchronize the strokes of the two movable blades to one another as closely as possible. Adjust the timings of the movable blades so as to minimize the difference between them. In addition, do not set the anvil in such a way that the anvil's center blade will pull the leads, as this will result in excessive mechanical stress to the LED lamps, which might damage them. Avoid any blade which is defective or which shows signs of excessive wear. * For using other than Panasert, please refer to the specifications for the automatic mounting machine which is to be used.
*
2
2007-10-01
TLRME68CG(F),TLYE68CG(F),TLGE68CG(F),TLFGE68CG(F)
TLRME68CG(F)
IF - V F
100 Ta = 25C 50 1000 Ta = 25C
IV - IF
30
Luminous intensity IV (mcd)
1.7 1.8 1.9 2.0 2.1 2.2 2.3
(mA)
100
Forward current IF
10
5 3
10
1 1.6
1 1
10
100
Forward voltage VF
(V)
Forward current IF
(mA)
IV - Tc
10 5 3 1.0
Relative luminous intensity - Wavelength
IF = 20 mA
Relative luminous intensity IV
Ta = 25C
Relative luminous intensity
-20 0 60 80
0.8
0.6
1 0.5 0.3
0.4
0.2
0.1
20
40
0 580
600
620
640
660
680
700
Case temperature Tc (C)
Wavelength (nm)
Radiation pattern
80
IF - Ta Ta = 25C
IF (mA)
60
20 30 40 50 60 70 80 90
10
0
10
20 30 40 50 60 70 80 90 1.0
Allowable forward current
40
20
0
0.2
0.4
0.6
0.8
0 0
20
40
60
80
100
120
Ambient temperature Ta (C)
3
2007-10-01
TLRME68CG(F),TLYE68CG(F),TLGE68CG(F),TLFGE68CG(F)
TLYE68CG(F)
100 Ta = 25C 50 30
IF - V F
1000 Ta = 25C
IV - IF
Luminous intensity IV (mcd)
1.7 1.8 1.9 2.0 2.1 2.2 2.3
(mA)
100
Forward current IF
10
5 3
10
1 1.6
1 1
10
100
Forward voltage VF
(V)
Forward current IF
(mA)
3
IV - Tc
Relative luminous intensity - Wavelength
1.0 IF = 20 mA Ta = 25C
Relative luminous intensity IV
1
Relative luminous intensity
-20 0 60 80
0.8
0.6
0.5 0.3
0.4
0.2
0.1
20
40
0 540
560
580
600
620
640
660
Case temperature Tc (C)
Wavelength (nm)
Radiation pattern
80
IF - Ta
Ta = 25C
IF (mA)
20 30 40 50 60 70 80 90 10 10 20 30 40 50 60 70 80 90 1.0 60
Allowable forward current
0
40
20
0
0.2
0.4
0.6
0.8
0 0
20
40
60
80
100
120
Ambient temperature Ta (C)
4
2007-10-01
TLRME68CG(F),TLYE68CG(F),TLGE68CG(F),TLFGE68CG(F)
TLGE68CG(F)
IF - V F
100 Ta = 25C 50 1000 Ta = 25C
IV - IF
30
Luminous intensity IV (mcd)
1.7 1.8 1.9 2.0 2.1 2.2 2.3
(mA)
Forward current IF
100
10
5 3
10
1 1.6
1 1
10
100
Forward voltage VF
(V)
Forward current IF
(mA)
IV - Tc
10 1.0
Relative luminous intensity - Wavelength
IF = 20 mA
Relative luminous intensity IV
5 3
Ta = 25C
Relative luminous intensity
-20 0 60 80
0.8
0.6
1 0.5 0.3
0.4
0.2
0.1
20
40
0 520
540
560
580
600
620
640
Case temperature Tc (C)
Wavelength (nm)
Radiation pattern Ta = 25C
IF (mA)
80
IF - Ta
60
20 30 40 50 60 70 80 90
10
0
10
20 30 40 50 60 70 80 90 1.0
Allowable forward current
40
20
0
0.2
0.4
0.6
0.8
0 0
20
40
60
80
100
120
Ambient temperature Ta (C)
5
2007-10-01
TLRME68CG(F),TLYE68CG(F),TLGE68CG(F),TLFGE68CG(F)
TLFGE68CG(F)
IF - V F
100 Ta = 25C 50 1000 Ta = 25C
IV - IF
30
Luminous intensity IV (mcd)
1.7 1.8 1.9 2.0 2.1 2.2 2.3
(mA)
Forward current IF
100
10
5 3
10
1 1.6
1 1
10
100
Forward voltage VF
(V)
Forward current IF
(mA)
IV - Tc
10 5 3 1.0
Relative luminous intensity - Wavelength
IF = 20 mA
Relative luminous intensity IV
Ta = 25C
Relative luminous intensity
-20 0 60 80
0.8
0.6
1 0.5 0.3
0.4
0.2
0.1
20
40
0 520
540
560
580
600
620
640
Case temperature Tc (C)
Wavelength (nm)
Radiation pattern Ta = 25C
IF (mA)
80
IF - Ta
60
20 30 40 50 60 70 80 90
10
0
10
20 30 40 50 60 70 80 90 1.0
Allowable forward current
40
20
0
0.2
0.4
0.6
0.8
0 0
20
40
60
80
100
120
Ambient temperature Ta (C)
6
2007-10-01
TLRME68CG(F),TLYE68CG(F),TLGE68CG(F),TLFGE68CG(F)
RESTRICTIONS ON PRODUCT USE
* The information contained herein is subject to change without notice.
20070701-EN
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
7
2007-10-01

▲Up To Search▲

Price & Availability of TLYE68CG

	To Download TLYE68CG Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .